Skylines Downunder NZ Car Club

General Automotive => General Skyline Discussion => Topic started by: jade501 on May 10, 2012, 06:19:18 PM

Title: boosh #3737 5 wire wide band o2 sensor
Post by: jade501 on May 10, 2012, 06:19:18 PM
i have a wide band o2 sensor now what does the lc1 that plugs into wide band do?? and do i need it cheers
Title: boosh #3737 5 wire wide band o2 sensor
Post by: downtrail on May 10, 2012, 06:26:18 PM
a varity of things. it displays af ratio in real time. logs af ratios, out puts a signal to ecu if you are running closed loop with af ratio targeting. so if this is the case then yes both are needed as the ecu refers to the data out put and adjusts your maps to target the reading.

What ecu is in your car?
Title: boosh #3737 5 wire wide band o2 sensor
Post by: westybob on May 11, 2012, 06:43:28 AM
You need the LC1 or similar to convert the signal for a gauge and/or to feed into your aftermarket ecu or laptop.
Title: boosh #3737 5 wire wide band o2 sensor
Post by: jade501 on May 11, 2012, 03:41:42 PM
does any1 now were to buy a lc1 seperate??
Title: boosh #3737 5 wire wide band o2 sensor
Post by: jade501 on May 11, 2012, 03:42:14 PM
and its a ems v4 stinger
Title: boosh #3737 5 wire wide band o2 sensor
Post by: westybob on May 11, 2012, 05:19:29 PM
There are a few sellers on TM one of them will probably delete the sensor from the LC1 as they sell the sensors on their own as well e.g.
http://www.trademe.co.nz/motors/car-parts-accessories/performance/electronics/auction-473344954.htm
or you could email them direct:
http://www.innovatemotorsports.com/xcart/home.php