Congrats to our New President Anguss!!
Remember to like us on Facebook!! - https://www.facebook.com/skylinesdownunder

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 30ed32

Pages: [1] 2 3 ... 33
1
General Performance / Re: 25de+t no go 😞
« on: June 26, 2018, 07:50:34 PM »
Timing, check cas is in the right place and all the usual other things

2
Audio, Security and Electrical / Re: Help needed identifying this part
« on: September 08, 2017, 09:18:52 PM »
If I understand you correctly then you can just ditch that as you're using a different setup now.

3
Audio, Security and Electrical / Re: Help needed identifying this part
« on: September 06, 2017, 10:21:07 PM »
injector resistor and don't use photobucket use imgur

4
General Skyline Discussion / Re: I wanna turbo my 300gt
« on: August 16, 2017, 07:55:51 PM »
I have all the items in the picture for sale (not my picture) which came off a vq30, it's a standard vq30det turbo but its pretty small.


5
Picture Post / Re: r32 gts4 build
« on: October 09, 2016, 11:55:27 AM »
Here is a pic with the coil cover on sorry for bad lighting.


6
Picture Post / Re: r32 gts4 build
« on: October 06, 2016, 12:24:25 PM »
Yeah I haven't got any recent pictures will probably get some this weekend, but yeah coil cover is the same color as the covers and it looks nice and stealth.  I will get some pictures with it on but it will be getting changed as I've decided to use some denso COPs.. pencil coils whatever you want to call them and they have built in ignitors so need need for the cut out at the back for the factory ignitor pack anymore.

7
Picture Post / Re: r32 gts4 build
« on: October 05, 2016, 02:50:10 PM »
China front facing plenum that was machined flat and painted black



800cc injectors



Got these from nissan so the injectors would fit properly and seal, they are just the same as the insulators on the 25 side feed rail



How it looks all together in the car



Coil cover I made up, I think it looks a lot better than the factory ones and it lets the heat escape.  Once it's painted and fit it looks nice.  If anyone wants one of these made or anything else laser cut that can be arranged


8
Picture Post / Re: r32 gts4 build
« on: October 05, 2016, 11:50:54 AM »
I have used the vtc mod before on another 30 where I just manually drilled the old plug and put it back in never had any issues.

9
Picture Post / Re: r32 gts4 build
« on: October 04, 2016, 09:10:10 PM »
In an earlier post I said the oil pump will need to come off again and now is the time, the reason for it is for an external (sort of) oil pick up because it's just easier with the 4wd sump.

So I welded a fitting on the oil pump for the external pick up



Blocked the original pick up gallery on the front of the block



Added this to the sump



original pick up modified



What it all looks like together


10
Picture Post / Re: r32 gts4 build
« on: October 04, 2016, 09:00:05 PM »
Seeing as it now has a 25 head with vtc it needed some way to get to oil there so I this replacement plug up with a hole in it, if you've seen the internal method before this will make sense.



Now just some pics of the exhaust manifold and turbo box... I didn't have any input in choosing these parts by the way






11
Picture Post / Re: r32 gts4 build
« on: October 04, 2016, 03:36:35 PM »
Arp head studs



Fit in the block..



Cometic head gasket



Head acid dipped and had a little skim



Put onto the block..



New exhaust studs



Studs in the head.. pretty exciting to look at I know


12
Picture Post / r32 gts4 build
« on: October 04, 2016, 02:56:38 PM »
Pretty standard rb30det build here I did for a friend anyway here are some pics.

Don't have pictures of everything so I'll just show what I have.

Here are a few shots of the clearance cuts that had to be done to the block to clear the bolts on the sump adaptor plate.







Crank collar..



Grub screwed crank



New rb26 oil pump which comes off later



Arp rod bolts that were used


13
have they done this?

http://www.nicoclub.com/archives/g35-how-to-reset-ecu-throttle-pedal-release-idle-air-volume-learning.html

also checking the obvious things like vacuum leaks, the air flow meters and also that the ecu is right for the engine there are a few variations

On a side note do you still have the old engine?

14
Maintenance & Car Care / Re: Clutch disengagement issues.
« on: November 05, 2015, 07:46:22 PM »
adjust the pedal

15
Maintenance & Car Care / Re: No boost
« on: October 28, 2015, 06:54:35 PM »
pipe blown off intercooler side

Pages: [1] 2 3 ... 33