Congrats to our New President Anguss!!
Remember to like us on Facebook!! -

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Hr31rb30

Pages: [1] 2 3 ... 20
Old Skool Skyline / Re: 1986 hr31 sedan
« on: October 22, 2015, 08:12:31 AM »
so have changed a few things here and there but its still not finished, its nearly all polished except the bits i haven't sprayed yet but thats done

not bad for painted in a dusty old factory i think.

finished exhaust just need to fit the rear bumper and cut it to length


All up higher than the rails and over the diff pretty much straight through. sprayed it all high temp black while i was there hahaha whole car is almost black now figured why not.

its all running and driving now booked in for a tune next thursday so fingers crossed all goes well tuner recommended a bit of bigger fuel system so got some 1000cc injectors , a aeroflow top feed rail kit and a walbro intank 450LPH pump


so yeah hopefully next week we will find out if everythings right or not haha will post up when i know!

Off-Topic / Re: Who is actually active on here?
« on: October 22, 2015, 08:04:30 AM »
Still pop in every now and again, cars still not finished haha ::)

Old Skool Skyline / Re: Stagefumer11's R30 coupe, UPDATE!!!
« on: December 08, 2014, 04:24:14 PM »
niiice man looking good!

Old Skool Skyline / Re: 1986 hr31 sedan
« on: October 17, 2014, 12:12:21 PM »
been a while things been slow but getting there 30 blocks back just need a head gaskit and few fittings and it will be ready to go back together cars being sanded back and polished right now so should start to look good soon well not bad for painted in a dusty old factory anyway hahaha...

as it sits now

almost have of it sanded back and polished now hopefully not much longer

Off-Topic / My other car is a...
« on: July 29, 2014, 04:06:53 PM »
yep always good to see what everyone else has cause there is usually always something else haha

And yea got to get some re made for it these ones are a bit rough, wouldn't bother if it wasn't genuine but it is so they can stay.

Off-Topic / My other car is a...
« on: July 29, 2014, 08:02:18 AM »
I like this its good to see what other cars people have

im driving this little green thing daily got it for $1000 warranted and registered  manual vtec but uses a bit of oil hahaha :/

also trying to finish my vr4 evo 0 galant but haven't even touched it in months full rebuild on that one.


all prepped and primed now almost ready for paint  other than that just been sourcing parts original bumper and bonnet gearbox.

White stagea looks mint!! still trying to talk my mrs into getting one but she reckons I need to finish one of my cars first haha.

Picture Post / Ryeoons R32
« on: July 03, 2014, 12:30:04 PM »
looking good bro nice photo

Old Skool Skyline / 1986 hr31 sedan
« on: June 16, 2014, 07:32:37 AM »
hey cheers man me either been a long time coming hahaha, and I don't really know at this point was going to go with some wide 15/16 inch long champs or some ssr meshies but seeing them more and more so bit lost other choice was going to be te37-v or some bigger te37 SL's still lost so those will be the last thing I buy

Old Skool Skyline / 1986 hr31 sedan
« on: June 13, 2014, 09:41:26 AM »
soooo been a bit slow round here but its getting there still waiting on my 30 block to be finished costing me a bit more than I had laying around so its a slow process haha. least it will be a brand new motor

interior is pretty much all back in few more things that need a paint and what not

 got seats in

re carpeted the boot with some stuff I had laying around everything else bar the battery box is mounted in the boot get round to that when I decide where in the boot its going to go

finished off my parcel tray just got to put vents and stuff back in it

paint all the exterior trims satin black to break up all the gloss and got the polisher out on all the chrome but forgot to get picks will grab some when I put them on they came up mint! this photos before I polished the chrome


got the grille in and lined up bonnet catch and tucked whats left of the loom up under the top of the guard to avoid any rubbing

just little things left really fuel flap, boot popper, put windows back in , need to get a bosskit to put my steering wheel on finally fixed that crooked intercooler was driving me crazy so made up some new mounts for the bottom and another for the top which straightened it out photo is before I fixed it

couldn't stand it anymore hahaha but its all sweet now so not much more to do still have to fit rear suspension and put the lsd in and finish exhaust off other than that its just a waiting/money game

Maintenance & Car Care / The Cert process
« on: May 08, 2014, 03:48:54 PM »
ahhhh there bigger than what was on the front of my r31 lol don't know about the rest sorry man I think they are 280mm or 274mm disks and they have the 100mm bolt spacing for the big calipers too but  just needed something a bit better than standard Ill get some slotted rotors and better pads eventually but key was that the fit under 15s....there fine under the standard 14s too

but I have seen r33gts25t brakes behind 15s

and yeah r33 n/a 2 pots were my other option but got a silvia stuff cheap

Maintenance & Car Care / The Cert process
« on: May 08, 2014, 01:26:24 PM »
^^^ this is why I went s13 turbo brakes can fit 15s and 14s

Old Skool Skyline / 1986 hr31 sedan
« on: April 08, 2014, 07:51:21 AM »

in the under construction part of the nzpc mag

Off-Topic / Noisy Pink Bubbles
« on: April 08, 2014, 07:50:23 AM »
I had one of them Chinese turbos on one of my mitsi's ran on 18psi for a year with no problems and is still going apparently from what ive heard from the guy who I sold it to, don't know if it was just a lucky one or what but it seemed fine. and did the job

Old Skool Skyline / 1986 hr31 sedan
« on: April 02, 2014, 07:34:16 AM »
cheers bro

Old Skool Skyline / 1986 hr31 sedan
« on: March 26, 2014, 08:15:20 AM »

 put front suspension in and they are set at max height and are lower than 100mm off the will have to do something about that hahaa s13 brakes,hubs,knuckles and lca's are all in now  an have started putting the inside back together

Pages: [1] 2 3 ... 20