Congrats to our New President Anguss!!
Remember to like us on Facebook!! - https://www.facebook.com/skylinesdownunder

Author Topic: Torque settings?  (Read 518 times)

ph1

  • Guest
Torque settings?
« on: June 10, 2001, 01:56:11 AM »
reveddie
Registered User
(5/4/01 12:02:38 am)
Reply  Torque settings?
--------------------------------------------------------------------------------
 Hey guys, Eddie here.
I'm in the process of putting my injun back together and need to track down the head torque settings for a rb20det silver cover motor, I have a rough idea what they are but any suggestions would be most appreciated. Cheers Eddie.
 
Zapf  
Registered User
(5/4/01 12:08:46 am)
Reply
  Re: Torque settings?
--------------------------------------------------------------------------------
 Interesting.... who's got the workshop manual and can read Japanese. Or just ask Rob. He must have done a few of them.

Cheers
Zapf
 
reveddie
Registered User
(5/5/01 1:57:35 am)
Reply  Re: Torque settings?
--------------------------------------------------------------------------------
 Hey Zapf
Excuse my ignorance but who is Rob? I,m in Aus and am new to this newsgroup,
Cheers Eddie.
 
HytechEngines
Registered User
(5/5/01 9:16:09 am)
Reply  RB20 Cyl Head Torque
--------------------------------------------------------------------------------
 Head is torqued down in 5 stages.
1. 22ftlbs
2. 72ftlbs
3. slacken off
4. 22ftlbs
5. 75ftlbs or 90o

Regards
Dick
 
Zapf  
Registered User
(5/5/01 1:37:52 pm)
Reply
  Re: RB20 Cyl Head Torque
--------------------------------------------------------------------------------
 Thanks Dick.... We do have to remember there are other engine builders out there.

;o)

Zapf
 
reveddie
Registered User
(5/6/01 3:47:54 am)
Reply  Re: RB20 Cyl Head Torque
--------------------------------------------------------------------------------
 Dick, your a champion! many thanks, Eddie.