Congrats to our New President Anguss!!
Remember to like us on Facebook!! - https://www.facebook.com/skylinesdownunder

Author Topic: tilton vtripple plate clutch  (Read 592 times)

cwint

  • RB20DET
  • ***
  • Posts: 204
    • View Profile
    • http://
tilton vtripple plate clutch
« on: May 25, 2005, 08:59:44 PM »
has anyone used these in their cars?
does anyone know where to get new centre spline plates to suit gtst?

Bradyz

  • RB25DET
  • ****
  • Posts: 489
    • View Profile
    • http://www.bradyz.orcon.net.nz/NTMID8.htm
tilton vtripple plate clutch
« Reply #1 on: May 26, 2005, 10:00:29 AM »
I have one in my car, holding up well with the rb30.
A bit of a pain to drive in slow traffic, takes some getting used to.
RIPS may be able to help, thats where I got my clutch from.
Only milk comes in 2 litres ;)

RB30DET 400+rwkw
10.93@125mph

RH9

  • Guest
tilton vtripple plate clutch
« Reply #2 on: May 26, 2005, 12:19:06 PM »
The part number is listed by Tilton, it might be under VG30DETT since they run a similar box. Go check with your dealer.

Since they are such a small diamter clutch and lack the inertia of a Giken or ORC you should use a flywheel thats not too light............I know Joe Kyle in the "blue oyster" had to get a heavier flywheel made for his as it was a pain to take off in

;) :D

SlowGTR

  • Guest
tilton vtripple plate clutch
« Reply #3 on: May 26, 2005, 12:46:40 PM »
I think Cardwells Racing Supplies on the shore are agents.. just a guess i not a Jaffa:D

RIPS

  • RB26DETT
  • *****
  • Posts: 1368
    • View Profile
    • http://rips@inspire.net.nz
tilton vtripple plate clutch
« Reply #4 on: May 27, 2005, 02:33:59 PM »
I have a steel flywheel and tilton tripple plate set up in stock $2000+gst. I've used them in heaps of cars, they take a bit to get use to but they sure don't slip!!!.......Rob
RIPS Racing
Worlds most powerfull RB30s, 7.8 @ 177mph in 240z and 7.26 @ 181mph in FED
Worlds quickest R34 street GTR, Worlds quickest 240z
RIPS FED current NZ record for DD/D with a 7.26 @ 181mph
PLEASE DON\'T PM ME, e-mail me
http://www.ripsracing.com  e-mail rips@inspire.net.nz

cwint

  • RB20DET
  • ***
  • Posts: 204
    • View Profile
    • http://
tilton vtripple plate clutch
« Reply #5 on: May 27, 2005, 06:00:40 PM »
well ive got a clutch for $600 and im getting a flywheel for about $50 so thanks but no thanks rob.