Congrats to our New President Anguss!!
Remember to like us on Facebook!! - https://www.facebook.com/skylinesdownunder

Author Topic: coilpack replacement  (Read 1426 times)

jps

  • RB20DET
  • ***
  • Posts: 151
    • View Profile
coilpack replacement
« on: October 13, 2006, 05:16:02 PM »
i really need a foolproof coilpack replacement tutorial for DUMMIES. Can anyone help?
******************************************
1962        Vespa Gran Sport Mark 1 160cc
1955        Zundapp 200S
1999        Skyline R34 RB25de
1940ish    Velosolex 49cc (2 of \'em)

Erelyes

  • RB26DETT
  • *****
  • Posts: 1509
    • View Profile
coilpack replacement
« Reply #1 on: October 13, 2006, 06:38:09 PM »
1. Remove "finisher" that goes inbetween rocker covers. Should say something like "24 valve" blah blah blah. 8 hexkey screws.

2. You will see the coils and the plugs on them. Remove plug on pack concerned. Remove screws around coil concerned (4) with phillips head.

3. Pull coil out.

:)

And of course installation is reverse of removal.
- Pete

JULZZ

  • RB25DET
  • ****
  • Posts: 276
    • View Profile
    • http://
coilpack replacement
« Reply #2 on: October 17, 2006, 10:09:43 PM »
Its not that hard, if you are prepared to get ur hand dirty......
On an RB20/25DET, as a hint, you will need to get the J-pipe off. Once it is off, then its simply a matter of unscrewing the cover, and then the coilpacks..... Sorry, when i did mine i forgot to take pics, beside the fact that my hand was dirty and i don't feel like touching my camera when my hands are dirty :P...

injected

  • Guest
coilpack replacement
« Reply #3 on: October 26, 2006, 07:58:58 PM »
Hey, try my post.. I know I havn't finished it coz i'm lazy.. but yeah.

http://www.skylinesdownunder.com/forums/showthread.php?t=51091

It's pretty easy to replace the coilpacks, might as well change the sparkies while your at it ;) :P