Author Topic: Subframes. (Read 1156 times)

r32_purpose · « **on:** September 16, 2011, 09:28:24 AM »

Does Anyone Know if r34's have r200 subframes? the turbo models.
cheeers

Harley · « **Reply #1 on:** September 16, 2011, 09:47:39 AM »

what do you mean by that?
Do you mean will they fit an R200? or will it fit an R32/R33?

I Assume the turbo ones do have an R200 VLSD but am no R34 owner

R32ONP · « **Reply #2 on:** September 16, 2011, 11:42:28 PM »

yes they use r200..different rear cover

use r32 rear cover on r34 diff to fit a r32

r32_purpose · « **Reply #3 on:** September 18, 2011, 09:53:21 AM »

What im actually trying to do is, I have a s14 silvia, and im trying to put a r200 diff into it (keep blowng r180's) but i need a r200 subframe to, i know they bolt stright in, but do R34's have r200's? the turbo models. because i've found a r34 turbo subframe. and the diff bolts work but dunno if the rest do.

R32ONP · « **Reply #4 on:** September 18, 2011, 10:02:50 AM »

yes they are r200 i said that

R32-25t off here has a r34 r200 in his r32 with r32 backing plate so it still bolts up to the r32 subframe

Andy14 · « **Reply #5 on:** September 18, 2011, 12:58:55 PM »

Quote from: r32_purpose;571887

What im actually trying to do is, I have a s14 silvia, and im trying to put a r200 diff into it (keep blowng r180's) but i need a r200 subframe to, i know they bolt stright in, but do R34's have r200's? the turbo models. because i've found a r34 turbo subframe. and the diff bolts work but dunno if the rest do.

i havnt had personal experience with a r34 but a r33 subframe fits the s14, and is a r200 subframe. on a side note r32 subframe will not fit unless you force it on or make up some offset subframe bushes.

r33 will bolt straight in. the only problem that you may run into is with the diff. r33 will have a 2 bolt back plate while a r32 diff has a 4 bolt. and a r180 back plate dosent bolt up to the diff. i recently did this to my s14.

Im sure the r34 would be the same.