Congrats to our New President Anguss!!
Remember to like us on Facebook!! - https://www.facebook.com/skylinesdownunder

Author Topic: 20det clutch lines need help .  (Read 1138 times)

jasonH

  • RB20E
  • *
  • Posts: 9
    • View Profile
20det clutch lines need help .
« on: October 04, 2011, 08:40:34 PM »
what does the black box in the clutchs lines do ? and can i by pass it ? thanks

cefliner

  • RB25DET
  • ****
  • Posts: 289
    • View Profile
20det clutch lines need help .
« Reply #1 on: October 04, 2011, 08:43:49 PM »
You can bypass it.

jasonH

  • RB20E
  • *
  • Posts: 9
    • View Profile
20det clutch lines need help .
« Reply #2 on: October 04, 2011, 08:46:15 PM »
ohk i have bypassed it all redy and  it takes very close to grown is this normal or is it just my clutch i have a exedy h/d organic?

cefliner

  • RB25DET
  • ****
  • Posts: 289
    • View Profile
20det clutch lines need help .
« Reply #3 on: October 04, 2011, 08:59:04 PM »
Air in the lines, air in the master cylinder or wrong sized pin.  Not normal no.  Also welcome to SDU.

jasonH

  • RB20E
  • *
  • Posts: 9
    • View Profile
20det clutch lines need help .
« Reply #4 on: October 04, 2011, 09:13:36 PM »
ohk thank , um its out of a r32 and is in my a31 . so would it be the pin ? we have bleed it it works just seems to take very close .

cefliner

  • RB25DET
  • ****
  • Posts: 289
    • View Profile
20det clutch lines need help .
« Reply #5 on: October 04, 2011, 09:29:41 PM »
Shouldn't matter if it's in a cef.  The pin should have a tiny bit of play between the slave cylinder and the fork.  Some people just grind 10mil bolts down.  If that fails I would recommend re-bleeding your lines and then check  to see you have the correct release bearing installed.

jasonH

  • RB20E
  • *
  • Posts: 9
    • View Profile
20det clutch lines need help .
« Reply #6 on: October 04, 2011, 09:35:39 PM »
ohk thank so much !

projects

  • RB26DETT
  • *****
  • Posts: 974
    • View Profile
    • http://www.zerofighter.co.nz
20det clutch lines need help .
« Reply #7 on: October 04, 2011, 11:01:09 PM »
also adjust the pedal height in the car. have you done a manual conversion??
Rb26det Holset S13 Track car.

http://www.zerofighter.co.nz

silva_fox

  • RB20DET
  • ***
  • Posts: 230
    • View Profile
20det clutch lines need help .
« Reply #8 on: October 04, 2011, 11:23:56 PM »
Notoriously hard to bleed properly...Replace the whole thing with -3 braided line.