Congrats to our New President Anguss!!
Remember to like us on Facebook!! - https://www.facebook.com/skylinesdownunder

Author Topic: Ryeoons R32  (Read 63193 times)

downtrail

  • RB26DETT
  • *****
  • Posts: 628
    • View Profile
Ryeoons R32
« Reply #1050 on: August 10, 2014, 09:25:09 PM »
I think I alowed for an input from power steer idle up sensor in your adaptor whether or not e and h configured it is a diffrent story lol.
----->UNLIKE OTHER FORMS OF SPORT DRIFTING REQUIRES THE USE OF TWO BALLS<-----

[SIGPIC][/SIGPIC]

http://www.facebook.com/cole.customs

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Ryeoons R32
« Reply #1051 on: August 15, 2014, 05:48:41 PM »
Just finished removing all power steering lines, hicas, pump, ac unit etc etc. Now I can finally clean the engine bay up. More space to play with on both sides of the bay. Still working on Sump. priority number one now & then fit that along with all the new bits. Shweeeeet.

P.S Just like to put a big middle finger up to whoever invented hicas & hope he wasn't happy after being rich =P



Non hicas pump on left & hicas pump on right



Anyone want this **** for free? Can also have Hicas pump & bracket

« Last Edit: August 15, 2014, 05:50:08 PM by ryeoon »
[SIGPIC][/SIGPIC]

Mantis

  • RB20DET
  • ***
  • Posts: 215
  • Nissan Laurel Medalist
    • View Profile
    • Nissan-dedicated Instagram
Re: Ryeoons R32
« Reply #1052 on: August 21, 2014, 08:59:32 AM »
Great progress so far, must feel great having it out on the track! Ive seen a few photos pop up on Facebook from events, would love to be able to do similar with the Laurel but kinda hard while Im at school haha

DeadBroke

  • RB25DET
  • ****
  • Posts: 492
    • View Profile
Re: Ryeoons R32
« Reply #1053 on: August 21, 2014, 10:11:16 PM »
Great progress so far, must feel great having it out on the track! Ive seen a few photos pop up on Facebook from events, would love to be able to do similar with the Laurel but kinda hard while Im at school haha


Bro skidpan will only set you back. 60-70 bux. It doesn't murder tyres either.  Think of it this way. The fine you get from doing it on the street will outweigh the fee to skid your car all day legally.

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Re: Ryeoons R32
« Reply #1054 on: September 20, 2014, 08:05:27 PM »
Hey guys, been awhile. The new layout is off putting for me so I don't come on here as much. Here's what is happening with the drifter at the mo.

Putting old sump back on for time being but having bit of trouble cleaning out. Have used brake cleaner but dried in to a brown powder so gonna try brake cleaner it again. Once that's back on, solid mount the r32 non hicas rack & check out the lock. Have taken gaurds off ready for a bit of cutting  if so & thinking about cutting back the gaurd lip & putting on flares. Then once new rack & hubs all fitted up sweet, then it's back on the ground with wheel alignment with new filter/oil.

Also doing the power steering pump setup. Still trying to get a r32 non hicas reservoir but I'm liking the space and location of the non hicas pump. Running feed off pump to in front of radiator through a cooler then in to the rack then back to res neatly with proper hose. Will be running the non hicas p/s belt on the hicas crank pulley as it's been proven reliable. Just need to get the belt & hopefully it's a tad shorter compared to hicas one as that's how it measured up when checking it.

Where is a good place to get good quality oil filters from? Have noticed the Nismo ones aren't on trademe anymore?



[SIGPIC][/SIGPIC]

mŮk

  • RB25DET
  • ****
  • Posts: 264
    • View Profile
Re: Ryeoons R32
« Reply #1055 on: September 21, 2014, 03:03:39 AM »
It'd be better to run the power steering cooler off the return from the rack back to the reservoir rather than full pressure from the pump. Less hoses to pop of under pressure then 
If dolphins are so smart, why do they live in igloos

Pandaemonaeon

  • RB26DETT
  • *****
  • Posts: 969
    • View Profile
    • http://
Re: Ryeoons R32
« Reply #1056 on: September 21, 2014, 08:14:40 AM »
Yep. You'll blow a cooler to pieces in about half a second.
pure methamphatamachine

Team Sleeper

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Re: Ryeoons R32
« Reply #1057 on: September 21, 2014, 12:56:37 PM »
Okay, cheers for that. Easy enough to do. Still trying to find where I can get a Nismo or K&N oil filter.
[SIGPIC][/SIGPIC]

benji-nz

  • RB25DET
  • ****
  • Posts: 301
    • View Profile
Re: Ryeoons R32
« Reply #1058 on: September 21, 2014, 06:41:47 PM »
Okay, cheers for that. Easy enough to do. Still trying to find where I can get a Nismo or K&N oil filter.

http://www.redlineperformance.co.nz/products/oils-and-additives/oil-filters/nissan/
"I ran a 25 turbo on my 20 when I had stock cams. Managed 300whp at 24psi on e85 figured that was the max on that turbo"

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Re: Ryeoons R32
« Reply #1059 on: September 21, 2014, 06:56:32 PM »
Which one fits my 32 25DE?
[SIGPIC][/SIGPIC]

benji-nz

  • RB25DET
  • ****
  • Posts: 301
    • View Profile
Re: Ryeoons R32
« Reply #1060 on: September 21, 2014, 07:17:23 PM »
"I ran a 25 turbo on my 20 when I had stock cams. Managed 300whp at 24psi on e85 figured that was the max on that turbo"

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Re: Ryeoons R32
« Reply #1061 on: September 21, 2014, 08:06:51 PM »
http://www.redlineperformance.co.nz/products/oils-and-additives/oil-filters/nissan/kandn-performance-oil-filter-skyline-180sx-s13/

NISSAN SKYLINE R32 R33 R34 RB20DE/T RB25DE/T

Cheers. Just got one. Their $9 shipping seems rough. Need to sort cooler & P/S belt now.
[SIGPIC][/SIGPIC]

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Re: Ryeoons R32
« Reply #1062 on: September 27, 2014, 12:52:25 PM »
Can someone please remind of which of the two is the inlet on the non hicas p/s rack?

New K&N filter & 15w-40 Fuchs synthetic oil in too!

[SIGPIC][/SIGPIC]

benji-nz

  • RB25DET
  • ****
  • Posts: 301
    • View Profile
Re: Ryeoons R32
« Reply #1063 on: September 27, 2014, 03:40:39 PM »
On my non hicas pump the bottom is the return, the top is the feed.
"I ran a 25 turbo on my 20 when I had stock cams. Managed 300whp at 24psi on e85 figured that was the max on that turbo"

4ever_sideways

  • RB26DETT
  • *****
  • Posts: 1470
    • View Profile
Re: Ryeoons R32
« Reply #1064 on: September 27, 2014, 04:54:30 PM »
Top one.
Nothing is fool proof to a well accomplished fool.

Quote
Some people are like clouds, once they f*ck off it\'s a beautiful day.