Congrats to our New President Anguss!!
Remember to like us on Facebook!! - https://www.facebook.com/skylinesdownunder

Author Topic: Ryeoons R32  (Read 67833 times)

4ever_sideways

  • RB26DETT
  • *****
  • Posts: 1470
    • View Profile
Ryeoons R32
« Reply #315 on: May 12, 2013, 05:04:11 PM »
I think you'll find yourself having to get the hardrace ones (or similar). I've had those camber arms on for yonks. I've never been questioned at wof time about my arms considering they aren't certed. Guess they just saw the plate and assumed they were listed.
« Last Edit: May 12, 2013, 05:06:12 PM by 4ever_sideways »
Nothing is fool proof to a well accomplished fool.

Quote
Some people are like clouds, once they f*ck off it\'s a beautiful day.

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Ryeoons R32
« Reply #316 on: May 12, 2013, 05:16:42 PM »
Does r33 arms fit r32? Questioned for these -http://www.trademe.co.nz/motors/car-parts-accessories/nissan/suspension/auction-591129277.htm

They're cheap and as said above are certifiable.

Also sent autolign an email for pricing on 30mm & 28mm nolathane sway bushes for my aftermarket sway bars.
« Last Edit: May 12, 2013, 05:28:53 PM by ryeoon »
[SIGPIC][/SIGPIC]

sk8seddon

  • RB25DET
  • ****
  • Posts: 315
    • View Profile
Ryeoons R32
« Reply #317 on: May 12, 2013, 06:16:56 PM »
those you put the link up for have bushes on the ends and should be ok, just rose joints are considered to rough for public roads

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Ryeoons R32
« Reply #318 on: May 12, 2013, 06:37:03 PM »
Quote from: sk8seddon;614971
those you put the link up for have bushes on the ends and should be ok, just rose joints are considered to rough for public roads


But will they fit? Not sure of any compatibility between different models. They don't seem to stock any stated 32 ones.
[SIGPIC][/SIGPIC]

sk8seddon

  • RB25DET
  • ****
  • Posts: 315
    • View Profile
Ryeoons R32
« Reply #319 on: May 12, 2013, 07:49:49 PM »
prity sure rear toe arms are the same between r32 subframes and r33 subframes. so long as you have a non hicas subframe.

30ed32

  • RB26DETT
  • *****
  • Posts: 572
    • View Profile
Ryeoons R32
« Reply #320 on: May 12, 2013, 07:55:29 PM »
pretty sure toe arm bush  size is bigger.. 10mm wider on r33 or something like that
lol everything I say is just made up, don\'t pay any attention

sk8seddon

  • RB25DET
  • ****
  • Posts: 315
    • View Profile
Ryeoons R32
« Reply #321 on: May 12, 2013, 08:02:51 PM »
true i did use 10mm of washers to take up the gap on mine...

30ed32

  • RB26DETT
  • *****
  • Posts: 572
    • View Profile
Ryeoons R32
« Reply #322 on: May 12, 2013, 08:18:52 PM »
he wants to do it the other way around though
« Last Edit: May 12, 2013, 08:21:52 PM by 30ed32 »
lol everything I say is just made up, don\'t pay any attention

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Ryeoons R32
« Reply #323 on: May 12, 2013, 08:24:01 PM »
Bugger, can't use them then.
[SIGPIC][/SIGPIC]

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Ryeoons R32
« Reply #324 on: May 14, 2013, 10:32:56 AM »
I got the set that comes with the traction rods. If I have to change later then it's easy enough.
[SIGPIC][/SIGPIC]

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Ryeoons R32
« Reply #325 on: May 19, 2013, 11:35:27 AM »
New rear window lip, will be attached once painted & windows tinted next w/e. Here's my hicas line remedy til it buggers the pump. Need to make the curve in hose better. Took me a few hours by myself.

[SIGPIC][/SIGPIC]

4ever_sideways

  • RB26DETT
  • *****
  • Posts: 1470
    • View Profile
Ryeoons R32
« Reply #326 on: May 19, 2013, 11:58:40 AM »
You may as well trace those hicas lines to the front and loop them there. Gets rid of that piping then.
Nothing is fool proof to a well accomplished fool.

Quote
Some people are like clouds, once they f*ck off it\'s a beautiful day.

gtsr

  • RB26DETT
  • *****
  • Posts: 9390
    • View Profile
    • http://
Ryeoons R32
« Reply #327 on: May 19, 2013, 01:08:49 PM »
That loss in internal size of hose (where it kinks) is going to cause a flow restriction thus rise in pressure. The next place it leaks probably will be at the resouvoir hoses, hoses next to / just behind battery.

You can cut the rubber hoses x2 that go from the block piece near rear wheels to the hardpiping which goes to HICAS rack and join the 2x rubber hoses together to loop it near rear wheels.

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Ryeoons R32
« Reply #328 on: May 19, 2013, 06:23:05 PM »
Just a matter of being able to cut the pipe. I used a proper pipe cutter which was hard with the lines so close together. I imagine I'll just remove lines altogether when I get around to putting a non hicas pump on. I intend on having no kink in that hose.
[SIGPIC][/SIGPIC]

Ryeoon

  • RB26DETT
  • *****
  • Posts: 1212
    • View Profile
Ryeoons R32
« Reply #329 on: May 25, 2013, 08:56:06 PM »
Slack w/e for me! Only got a few hours work in on the skyline. Realised II need a 36mm socket to get the axles out of the hubs =/
[SIGPIC][/SIGPIC]