Congrats to our New President Anguss!!
Remember to like us on Facebook!! - https://www.facebook.com/skylinesdownunder

Author Topic: Auckland Cams  (Read 895 times)

Looney_Head

  • RB26DETT
  • *****
  • Posts: 2495
    • View Profile
    • http://
Auckland Cams
« on: May 27, 2013, 03:53:57 PM »
Hi people, simple question has anyone used Auckland Cams or their products?
god is just an imaginery friend for grown ups

gtsr

  • RB26DETT
  • *****
  • Posts: 9390
    • View Profile
    • http://
Auckland Cams
« Reply #1 on: May 27, 2013, 04:24:18 PM »
Do you mean this place??? -

http://www.aucklandcams.co.nz/cam_list.php

Most use Franklin Cams -

http://www.camshafts.co.nz/

Or Kelford cams -

http://www.kelford.co.nz/

Looney_Head

  • RB26DETT
  • *****
  • Posts: 2495
    • View Profile
    • http://
Auckland Cams
« Reply #2 on: May 27, 2013, 08:00:41 PM »
yeah i meant Auckland Cams (http://www.aucklandcams.co.nz) do you have any experiance with either Auckland Cams or Franklin Cams
god is just an imaginery friend for grown ups

b00stinz

  • RB26DETT
  • *****
  • Posts: 5819
    • View Profile
Auckland Cams
« Reply #3 on: May 27, 2013, 10:52:31 PM »
Emailed the guy a few months ago about options for cams. Here is the emails back from them. Seems like a very good, honest, helpful bunch :)
Obviously not work done by them or anything but in my experience, good customer service initially says a lot

Quote

From:
Sent: Saturday, September 29, 2012 4:42 PM
To: henry@aucklandcams.co.nz
Subject: RB20DET Camshafts
 
Hi,

I was wondering if you guys can grind RB20DET Camshafts to match the Tomei PONCAM shaft specifications and if so,
 how much would an estimated cost be for the intake and exhaust. Thanks!



Mon, 1 Oct 2012 at 22:49
1 Oct 2012
From: Auckland Cams
Sent: Sunday, 30 September 2012 7:23 PM
Subject: RE: RB20DET Camshafts

Hi
 
Yes we can help. We can do better. We have available Auckland Cams H160
 
Type: Fast Road Hydraulic Turbo 267 degrees
 
It our best cam profile yet for these engine. Cam drop straight in with new lash caps, no other modification required.
 
Duration @.002”: 267 degrees
Duration @1.00mm: 220 degrees
Duration @ .050”: 214 degrees
Cam lift: .342”
 
Grind camshafts $240.00
New lash caps (set of 24) $220.00
 
Total $460.00 plus gst
 
Let me know.
 
Cheers,
 
Henry van Vugt
Auckland Camshafts Limited
251 Don Buck Road
Massey, Auckland
http://www.aucklandcams.co.nz
Mobile: 0274-860400


Looney_Head

  • RB26DETT
  • *****
  • Posts: 2495
    • View Profile
    • http://
Auckland Cams
« Reply #4 on: May 28, 2013, 08:18:39 AM »
sweet thanks b00stinz i sent them an email yesterday seeing what they can do so will see what they come back with.
god is just an imaginery friend for grown ups