Congrats to our New President Anguss!!
Remember to like us on Facebook!! - https://www.facebook.com/skylinesdownunder

Author Topic: r32 4 door rb20det  (Read 938 times)

mambo_dude14

  • RB20E
  • *
  • Posts: 4
    • View Profile
r32 4 door rb20det
« on: September 13, 2016, 06:43:30 PM »
hey team i have a 4 door r32 skyline 20det its all factory but it is missing some vacume lines off the factory inlet manifold just wondering if some one has a diagram or some one near me can possibly come have a look for me so i can sus it out .  it is a work in progress  also has a few other issues its hard to explain as its my first one its almost like a surging under boost ,also gets to 8 psi and starts droping boost etc and othertimes will get upto 11 psi and hold etc  any ideas/help will be greatly appreciated cheers

westybob

  • RB26DETT
  • *****
  • Posts: 2990
    • View Profile
Re: r32 4 door rb20det
« Reply #1 on: September 13, 2016, 08:02:41 PM »
Sorry up in Auckland so can't call round. There is no boost solenoid on the RB20 so if it is a stock set up there should be a boost line going direct to the turbo  wastegate actuator which has a 10 psi spring. Can you get a pic up of your underbonnet set up?

mambo_dude14

  • RB20E
  • *
  • Posts: 4
    • View Profile
Re: r32 4 door rb20det
« Reply #2 on: September 17, 2016, 12:23:58 PM »
hey mate no worries . yup can get a photo of engine set up  etc. but yes its got a wastegate with a new 11 psi spring as was only boosting 4 pound before i replaced the spring . do u ahve an email address or somthing. unsure on how to upload photos to here cheers

westybob

  • RB26DETT
  • *****
  • Posts: 2990
    • View Profile
Re: r32 4 door rb20det
« Reply #3 on: September 17, 2016, 03:35:54 PM »
The standard site loader is very restrictive so usually use something like photobucket to get pics up. I don't know if you have to be here for a certain time before you can send a PM (try that first). I will try to PM you my email address.